Control board dimensions and supply voltage

Control board supply voltage from 7 VAC to 15VAC, and maximum supply current is 1 A, and there are voltage protection in all Control board input and output terminals, its 20VAC maximum
And control board dimension is 27*18 cm

Feature and Specifications

• Control board dedicated to working in the inverter panels and compatible with all types of inverters
• It saves 6 control relays (fast – slow – down – up – lighting and maintenance relay)
• It saves CAM contactor and CAM Bridge and 12- volt Bridge
• There are 4 switches on the control board to operate the inverter manually
• Arrows and gungs are taken directly from the control board
• There is a relay for MS (medium speed) on the control board, and it can be activated from programming
• Advanced programming for a smooth stop on the floor
• Panel not authorized for use in the two-speed control
• The card supports 2 CAM & 2 full Automatic doors or half automatic door for any chosen programmed floors up to 14 floors
• Errors and alerts appear on normal 7-segment 26 codes will be appeared.
• Card is 16 floors down collective with out and inner registration common.
• Supports all indicator types (7 segments – binary code – gray code – serial – 1.2.3.4.5)
• Overweight input directly on board
• Full load input directly on board
• All safeties are ready, (GAHEZ feature) and can be cancelled from programming
• Elevator life timer to block the lift after a certain hours up to 9999 hour ( max 416 day)
• Separated relay for up and down arrow
• Separated relay for automatic door (one relay for open and other for door close)
• Over voltage protection above to 20 VAC.
• Door fork safety
• Lock door safety
• Fire man feature
• VIP feature
• Delete a certain calling door from programming
• Cabin stop switch can delete the requests during stopping at the floor
• The upper and down limit switch reverse direction protection
• Push button calling
• Up-down collective selective calling
• Self-test mode
• Supports all operation modes (duplex – triplex …)
• The card supports all these collection modes
  Down collective mode
  Up – Down collective mode
  Up – Down collective selective mode
  Push button mode
  Duplex with all previous modes
  Triplex with all previous modes
  Saving cabin card

• There are all protection timers to protect the machine and the elevator mechanical parts during movement
• All malfunctions and timers lead to stopping the cabin at the nearest floor
• There is a normal programming and advanced programming to adjust and activate all features
• Automatic door opening feature when slipping from the floor level magnet
• Cancellation of all orders during stopping at the floor
• Solve the problems of the self-registration of the order button in any floor
• Signal point to check the mechanical brake to monitor the movement of the brake during opening and start operation
• There is a timer for displaying faults on the indicator to facilitate the diagnosis of faults
• All inputs and outputs of the control board have been protected from sudden high and low voltage
• The same programming as the old KAS control board, in addition to advanced programming with all the new features
• The same size connections and arrangement of the terminals of the old KAS control board