,

KAS 2025

0,00 $

The control board feature is a double protection, which means protecting the elevator machine from burning as a result of its high temperature and high drawn current in excess of the rated machine current. The feature consists of electronic overload and digital thermistor which fitted in the board

Wishlist Compare

Control board dimensions and supply voltage
Control board supply voltage from 7 VAC to 15VAC, and maximum supply current is 1 A, and there are voltage protection in all Control board input and output terminals, its 20VAC maximum.
And control board dimension is 24cm*18cm.

Feature and Specifications

  • Phase sequence, and phase correction works from 150 to 450 VAC) 380 or 220 Volt electricity) and arrows directed connected on the control board
  • The control board feature is a double protection, which means protecting the elevator machine from burning as a result of its high temperature and high drawn current in excess of the rated machine current. The feature consists of electronic overload and digital thermistor which fitted in the board
  • The control board also saves the CAM contactor and lighting relay
  • Supports two ways elevator with separate out callings up to 6 floors. Please tell us before ordering
  • The Up & down arrows connected directly from the control board without any additional wiring
  • Control board contains a 7-segment display to display door number and elevator errors
  • The card supports 2 CAM & 2 full Automatic doors or half automatic door for any chosen programmed floors up to 12 floors
  • Errors and alerts appear on normal 7-segment 26 codes will be appeared
  • Card is 8 floors down collective with out and inner registration common
  • Supports all indicator types (7 segments – binary code – gray code – serial -1.2.3.4.5)
  • Overweight input directly on board
  • Full load input directly on board
  • All safeties are ready, (GAHEZ feature) and can be cancelled from programming
  • Elevator life timer to block the lift after a certain hours up to 9999 hour (max 416 day)
  • Control board contains 12 VDC bridge
  • Separated relay for automatic door (one relay for open and other for door close)
  • Over voltage protection above to 20 VAC
  • Door fork safety
  • LOCK door safety
  • Fire man feature
  • VIP feature
  • Delete a certain calling door from programming
  • Cabin stop switch can delete the requests during stopping at the floor
  • The upper and down limit switch reverse direction protection
  • Push button calling
  • Up-down collective selective calling
  • Self-test mode
  • Supports all operation modes (duplex – triplex – hydraulic)
  • The card supports all these collection modes :
    Down collective mode
    Up – Down collective mode
    Up – Down collective selective mode
    Push button mode
    Duplex with all previous modes
    Triplex with all previous modes
    Saving cabin card
    Hydraulic with all previous modes
  • There are all protection timers to protect the machine and the elevator mechanical parts during movement
  • All hydraulic elevator features (3 valves – 4 valves – star/delta) and the feature of the cabin relevel position
  • All malfunctions and timers lead to stopping the cabin at the nearest floor
  • There is a normal programming and advanced programming to adjust and activate all features
  • Automatic door opening feature when slipping from the floor level magnet
  • Cancellation of all orders during stopping at the floor
  • Solve the problems of the self-registration of the order button in any floor
  • Signal point to check the mechanical brake to monitor the movement of the brake during opening and start operation
  • There is a timer for displaying faults on the indicator to facilitate the diagnosis of faults
  • All inputs and outputs of the control board have been protected from sudden high and low voltage
  • The same programming as the old KAS control board, in addition to advanced programming with all the new features
  • The same size connections and arrangement of the terminals of the old KAS control board
  • Supports two way elevator with separated out requests up to 6 floors. With any different door kinds Please tell us before ordering
  • It’s recommended for 2 speed control panel and for variable speed panel, please use card KAS inverter

Reviews

There are no reviews yet.

Be the first to review “KAS 2025”

Your email address will not be published. Required fields are marked *

Shopping Cart